Paving specialists in Poole – Stains You Can Encounter with Block Paving


Incorporating block paving in your residential or commercial driveway is beneficial because it offers an aesthetic appeal and a long-lasting finish to your property. While you try to maintain its good condition as best as possible, you must understand that your paving isn’t impervious to spills and stains.

Before you initiate the proper measures to get rid of the problem, you should take the time to determine where the stain came from so that you can perform the right solutions to eliminate it. That way, you can take care of the situation and prevent the stain or spill from getting worse and damaging your surface. Should you feel out of your depth or unable to attend this, you can also contact us the Paving specialists in Poole.

For best results, you should apply your stain treatment to one portion of the affected area and wait to see if it works properly before you proceed with working on the rest of your pavement. Keep reading below to discover the different kinds of stains that can cause problems to your block paving.


Moss, Lichens, and Algae

Moss, lichens, and algae are organisms that tend to grow in shaded areas that are damp and moist. If you find them on your driveway, you can get rid of them by using a tool to scrub them off thoroughly.

You can also consider applying chemicals to treat the affected area and eliminate moss or weed growing on your paving. The products may take a while to become effective, and you should utilise them when the climate is dry.


Tyre Marks

The change in the weather and the eventual wearing of your commercial paving allows tyre and skid marks to disappear on its own. But if you want faster results, you can scrub the region using hot water and detergent powder.

Make sure you use only the right amount of solution because applying too much can lead to some loss of pigment on your concrete. Aside from that, you can also incorporate power washing to get rid of the tyre marks left on your paving.


Rust Stains

You first need to establish where the rust stains are coming from before taking the necessary actions to treat your situation and prevent it from happening again. Once done, you will need to pour water on your pavement before putting a ten% hydrochloric acid solution over it.

If the solution isn’t available, you can use a similar product you can find from hardware stores. However, you must be careful with using hydrochloric acid because it tends to affect concrete and could leave a mark on the surface of your paving. Just make sure to follow the instructions when removing rust stains independently.


Paint Stains

If you accidentally put paint on your paving and it’s still fresh, you should apply an absorbent product over it and avoid spreading the stain. Afterwards, you should use the right solvent while adhering to instructions before you proceed with spraying the area with water and detergent.

However, if you’re dealing with dried up paint, try to scrape off as much as you can before using a paint remover to finish it off. Don’t forget to wash the region and throw away the remnants of dry paint to ensure your paving is clean and in good condition again.



Your block paving is relatively easy to maintain, so long as you wash and clean it when necessary to take care of any visible blemishes. If you want to guarantee your paving is in excellent condition for the years to come, it’s best to call a landscape building professional to handle your property for regular maintenance.

Are you looking for paving specialists in Poole, UK, to supervise your paving construction? Absolute Armour & Sons offers a full range of specialist building services to our domestic and commercial clients looking for groundworks, general landscape building, block paving, concreting, garden design, and more. Get in touch with us today so we can start improving your landscape!