Paving & Paths

When discussing matters about your home or your commercial establishment, there are many factors to consider to ensure you can get value for such a massive investment. A construction project is not a walk in the park, and if you miss out on specific points, you may put your building project at high risk of problems. You need paving specialists to get the job done right.

One of the things you need to consider for your project is the building specialists you’ll work with. Who’s going to design my building? Who’s going to be my main contractor? Who should I choose as my paving company? All of these questions are valid, but do you know the answers to your queries?

When choosing a paving company to work with, finding one with the lowest bid isn’t enough to guarantee quality results. If you’re on the hunt for your ideal paving company, stick around. This article is our ultimate guide that will help you choose the perfect paving specialist. Let’s get to it!

1. Ensure That the Paving Company Is Insured

One of the biggest things you could forget when looking for a company is asking if they’re insured. Working with an insured company will take off loads of anxiety and give you peace of mind since they will be protected should anything horrific happen on the construction site.

Working with a paving company without proper protection can give you more problems in the long run. You may end up dealing with hidden fees, deal with legal issues, and more.

2. They Should Be Using the Right Equipment

Another factor that you should consider is the type of equipment your paving specialists use. This is important because it can affect the outcome of your paving project in so many ways.

Working with a company with wonky and old equipment may save you a few bucks during the project. However, you might put out more cash for maintenance and repairs than you normally should in the coming years.

Quality equipment will allow paving specialists to properly lay down a blanket of asphalt, assuring a smoother job and outcome, while staying on the project timeline.

3. The Materials They Choose and Their Attention to Detail

Sure, your pavement will be driven on or stepped on, but that doesn’t mean it should be below standards. When you’re searching for the right paving company, make sure to ask what materials they use for their projects. Low-quality asphalt can affect your pavement’s longevity, so if they can give you better and more quality options, that would be a better choice.

Besides their materials, your paving specialists should be meticulous about every project they take. Their attention to detail matters because the outcome will showcase their expertise and ensure your satisfaction.

4. They Should Give Your a Proper Quote

Did you know that before the asphalt is laid down, you’ll have to pay for the bulk of materials you’ll use for your paving project? For this reason, you need to ensure that your paving contractors give you an accurate quote instead of a lazy estimate.

Getting inaccurate quotes could lead you to more expenses and piles of asphalt waste, so check their quotation breakdown before saying yes and putting out cash.

5. They Should Have a Good Reputation

Asking around about different paving companies is ideal because nothing is worth more than past clients’ feedback and experiences. Any reputable paving company will have a bunch of happy customers behind them, willing to show off their amazing work. For this reason, ask for their references and speak to industry specialists, like real estate agents and contractors, to help you find the best in your town.

The Bottom Line: The Lowest Bid Isn’t All That Matters When Finding a Paving Company

Of course, you want to work with a company that will keep you in your budget bubble. However, you may be compromising the quality of your pavement and increase the problems of your building project.

This is why you need to consider the other five important factors we presented in this article to help you find the best paving specialist you can work with.

Why Should You Work With Us?

Absolute Armour & Sons aren’t new to the game. With years of notable building experience, our team of building specialists will provide you with exceptional building services fit for your construction needs.

We are landscaping and paving specialists who offer block paving, groundworks, concreting, pond construction and water gardens, general landscape building, and more. Give us a call today!

The best results when it comes to Paving in Poole are generally born out of the combination of two very important factors: well-done planning and a smooth execution. When this happens, it will make the roadway in question long-lasting. Many paving specialists are well aware that high-quality roadways are more than just placing hot rocks down on the ground then compacting the said rocks.

Effort, energy and time generally go into planning, with the mix design and maintenance of the machines involved. At the end of the day, the goal is simple: pavement that looks smooth and feels sturdy, able to withstand both time and aesthetic needs.

Want to know how you can get that ideal result for your Paving in Poole? Read on for the best tips to get asphalt pavements that are of good quality:

• Have the right equipment and make sure it is set up correctly

Even the very best machinery and tools will be unable to help move things along if they’re not set up properly. Before you set foot anywhere near the job site, make sure that your needed equipment is complete and good to go. Has it been cleaned in the correct fashion, and thoroughly? How are the fluid levels? What is the status of your spray nozzles?

Make time to do full walkarounds of the equipment, and triple check to ensure that the right maintenance programs were done from start to finish. If there is a component you find yourself unsure of, the best course of action is to just have it replaced entirely before said machine goes anywhere.

• Keep the paving speed steady

It would be best for a paver to basically go paving for the whole workday with no pausing or stopping. This is largely because shifts in speed when it comes to paving will have a negative effect on having a uniform mat at the end. Amongst issues that can arise are irregular depth of the mat, ripples and waves.

• Remain consistent throughout the entirety of the job at hand

One of the most crucial parts of having a quality mat by the end of your job is consistency. This applies to the mix, roller pattern, speed of the paving and temperature, among others. If even a single one seems off in any capacity, make the necessary adjustments as soon as you can.

• Take the time to make a solid plan

Long before the start of any job or the construction in general, it’s wisest to begin planning. These plans can change and adapt as things move along, all the way until the final step and day of the entire endeavour. This includes stages such as pre-construction, the designing of things and procurement. All of those need to be planned extensively at their most basic levels, moving “up.” With each move towards progress that occurs per stage, there is a chance that revisions to the plan will be necessary as well.

Conclusion

When laid out correctly, asphalt pavements can be easy on the eyes and incredibly long-lasting. There are several things that can be done to ensure quality asphalt pavements. Some of the most important ones to note include overall consistency and solid planning.

In need of getting paving done in Poole? Contact Absolute Armour today! We provide a full range of specialised building services to a large number of domestic and commercial customers across Bournemouth, Poole, Southampton and throughout Dorset and Hampshire.

One of the first things you will see when approaching a house is its driveway, particularly whether it looks well-built and attractive. A beautiful driveway gives boosted appeal to one’s residence while also serving numerous practical purposes. An excellently-made driveway can even give your home the property value boost. By taking some time to make the right building decisions, it can become a great place for walking, playing, driving, and parking.

If you are planning to turn a residential space into an attractive and functional driveway, here are some tips on how to make the investment worthwhile:

#1: Be particular about your chosen surface

Before making a driveway, the first thing that you should consider is your chosen material. Remember, the driveway is a small private road meant for people and cars. As such, you must select a road surface that can hold out against their weight.

The driveway foundation and finish you decide on will determine how durable and appealing your driveway will be. There are four usual types of materials used for the driveway: pavers, asphalt, concrete, and gravel. When choosing a material, here are the factors you need to consider:

• Cost of the material vs your budget;
• Availability of your selected material;
• Its durability and lifespan (consider the number of cars that will park on your space);
• Proper drainage feature;
• Installation process and expense; and
• Aesthetic value.

If you plan to have a modern-looking driveway, you can try using imprint concrete or block paving. Besides the four mostly-used materials, you can also explore using other elements such as resin, tar, grass and paver, turf, or porous recycled glass.

Unlike other parts of a home, the driveway is not something that you need to update regularly, so make sure that you choose a material that will last for a long period.

#2: Consider adding landscaping

You do not have to fully give up your garden in exchange for a driveway—There is always a way to have the two. In fact, adding landscape around your driveway can advance your property’s look. Plants, greens, and flowers can always add a touch of class and life to your flat and dull-looking driveway.

Walking or driving over a green and blooming driveway is always a good experience. Make your home extra welcoming by adding low-growing plants, like creeping thyme, sedum, or varieties of daffodils along the strip you drive over. If you own a bigger land, you can always plant a tree for added shade.

#3: Factor in the maintenance

If your decision of paving your driveway is to get rid of your high-maintenance garden, you should choose a low-maintenance surface type. You also need to ensure that the correct weed protection is done before the contractors place your driveway to not encounter weed problems in the future.

Materials such as tarmac, block paving, and concrete are the most low-maintenance yet still most visually appealing materials. They are the perfect surface for homeowners with a busy lifestyle.!

Once you have chosen a material, you also need to take note of its regular maintenance. Driveway maintenance and preventive maintenance depends on your chosen material, but the most common and effective ways that will keep it looking good as new are the following:

• Power washing: to remove stubborn stains and grime
• Pressure washing: to remove the dirt and restore the aesthetic appeal
• Sealer: for protecting your concrete or asphalt driveways from water destruction
• Edging: for keeping your asphalt driveway intact

Looking after your driveway conscientiously will prevent it from quickly deteriorating.

Conclusion

The driveway is one of the focal points outside your home. Investing in a nice driveway from the start will free up your worries about keeping your home well-maintained and appealing throughout. Making the right decisions during the pre-construction can affect the durability and make of your driveway. As such, ensure that you think about these three tips and make them part of your decision-making process for the best results!

If you plan to transform your outdoor space into a stunning driveway, Absolute Armour & Sons is the paving specialist you need! We are the Brett-Approved paving experts you can trust, with a 10-year product guarantee and five-year installation guarantee. Connect with us today!