Paving specialists in Poole – Stains You Can Encounter with Block Paving


Incorporating block paving in your residential or commercial driveway is beneficial because it offers an aesthetic appeal and a long-lasting finish to your property. While you try to maintain its good condition as best as possible, you must understand that your paving isn’t impervious to spills and stains.

Before you initiate the proper measures to get rid of the problem, you should take the time to determine where the stain came from so that you can perform the right solutions to eliminate it. That way, you can take care of the situation and prevent the stain or spill from getting worse and damaging your surface. Should you feel out of your depth or unable to attend this, you can also contact us the Paving specialists in Poole.

For best results, you should apply your stain treatment to one portion of the affected area and wait to see if it works properly before you proceed with working on the rest of your pavement. Keep reading below to discover the different kinds of stains that can cause problems to your block paving.


Moss, Lichens, and Algae

Moss, lichens, and algae are organisms that tend to grow in shaded areas that are damp and moist. If you find them on your driveway, you can get rid of them by using a tool to scrub them off thoroughly.

You can also consider applying chemicals to treat the affected area and eliminate moss or weed growing on your paving. The products may take a while to become effective, and you should utilise them when the climate is dry.


Tyre Marks

The change in the weather and the eventual wearing of your commercial paving allows tyre and skid marks to disappear on its own. But if you want faster results, you can scrub the region using hot water and detergent powder.

Make sure you use only the right amount of solution because applying too much can lead to some loss of pigment on your concrete. Aside from that, you can also incorporate power washing to get rid of the tyre marks left on your paving.


Rust Stains

You first need to establish where the rust stains are coming from before taking the necessary actions to treat your situation and prevent it from happening again. Once done, you will need to pour water on your pavement before putting a ten% hydrochloric acid solution over it.

If the solution isn’t available, you can use a similar product you can find from hardware stores. However, you must be careful with using hydrochloric acid because it tends to affect concrete and could leave a mark on the surface of your paving. Just make sure to follow the instructions when removing rust stains independently.


Paint Stains

If you accidentally put paint on your paving and it’s still fresh, you should apply an absorbent product over it and avoid spreading the stain. Afterwards, you should use the right solvent while adhering to instructions before you proceed with spraying the area with water and detergent.

However, if you’re dealing with dried up paint, try to scrape off as much as you can before using a paint remover to finish it off. Don’t forget to wash the region and throw away the remnants of dry paint to ensure your paving is clean and in good condition again.



Your block paving is relatively easy to maintain, so long as you wash and clean it when necessary to take care of any visible blemishes. If you want to guarantee your paving is in excellent condition for the years to come, it’s best to call a landscape building professional to handle your property for regular maintenance.

Are you looking for paving specialists in Poole, UK, to supervise your paving construction? Absolute Armour & Sons offers a full range of specialist building services to our domestic and commercial clients looking for groundworks, general landscape building, block paving, concreting, garden design, and more. Get in touch with us today so we can start improving your landscape!

5 Ideas on How to Kick Your Patio Space up a Notch

landscape building company in Bournemouth

When it comes to having a residential property makeover, many homeowners prioritise their living space, kitchen, or bathrooms, and most of them tend to neglect the property’s outdoor area. What many fail to realise is that the outdoor space can actually kick the curb appeal up a notch and increase the overall property value!


Installing a patio can make all the difference and how this can be achieved by recruiting a landscape building company in Bournemouth to help.


A patio is a paved area located directly on the ground made of various materials, such as concrete, brick, flagstone, pavers, and gravel. This area can serve as an outdoor place for dining, family bonding, barbecue party, outdoor gathering, and so much more.


If you want to install a patio in your residential property, here are five bright ideas for you to consider:


  1. Have seats around a fire on a flagstone patio


When it comes to installing an outdoor patio, choosing durable materials for hard surfaces will make a difference in your efforts. For this reason, selecting a flagstone material can be your best bet. While you’re at it, be sure to construct a structure for a small bonfire and have several seats around it to give you and your loved one a romantic night under the moonlit sky.


  1. Have a sports area through a brick patio


It is good to have an outdoor space that will allow you and your kids to play sports outside. When it comes to this, installing a brick patio will be beneficial for your activities. Sure, it may not appear as aesthetically pleasing as a flagstone, but it will surely be highly functional for any outdoor sports. What’s good about it is that it is relatively easy to install and maintain in the long run!


  1. Install a running bond for your brick patio


The “running bond” is a specific pattern for bricks that are commonly used in outdoor construction. This pattern can be perfect for your outdoor patio, which is notable for its soothing effect and aesthetic appeal. When considering this design, you can have a resting place in the middle of a garden filled with flowers, shrubs, and vegetation.


  1. Carve sophistication through a tile patio


If you want your outdoor space to look elegant and sophisticated, then you may want to consider a tile patio. This can be a hard-surface option for your outdoor space, but be wary of the materials you’ll opt for so that it doesn’t become counterproductive. For this reason, choose tile products meant for the outdoors to avoid any hazard risks and promote the utmost safety.


  1. Create a Zen-like outdoor patio


Zen practice has been all the rage these days, which is the practice of meditation to achieve, peace, harmony, and balance. Communing with nature in your outdoor space can make all the difference in your home ownership experience. If you want to have a place for Zen in your residential property, consider having a Zen-like outdoor patio instead!




At this point, you now have several unique ideas when installing a patio in your home to take it to the next level. As outlined above, all it takes is to have seats around a fire on a flagstone patio, have a sports area through a brick patio, install a running bond for your brick patio, carve sophistication through a tile patio, and create a Zen-like outdoor space. With these options, you can go through each of them to determine that best one for your property!


We’re a landscape building company in Bournemouth, specialising in outdoor construction services for residential properties, such as general landscape, garden, groundwork, paving, and driveways. If you’re looking to transform your outdoor space through a patio, get in touch with us today to see how we can help!

Two Interesting Block Paving Ideas for Your Garden

paving specialists in Poole

The easiest way to address an unkempt and underwhelming garden is to close your curtains and pretend it doesn’t exist. However, this isn’t the solution you’re looking for.


Truth be told, your garden plays a crucial role in the overall look and attractiveness of your abode. It’s also worth mentioning that it’s an extension of your home, so it’s a venue for some of your daily activities. Whether it be enjoying your morning coffee or playing with your kids in the afternoon, it’s a part of your day-to-day routine. It is for this reason that giving it more time and attention is worth it.


While renovating your garden can seem overwhelming, the good news is that there are plenty of landscaping and surfacing companies you can approach for help. On top of that, there are surfacing options that let you achieve a low-maintenance yet charming garden. One particular solution you’ll want to consider is block paving.


What is Block Paving?


Also known as brick paving, this refers to the decorative process of creating a hard standing path or driveway. When done in your garden, this can serve both functional and aesthetic purposes.


In the sections below, you will learn two of the many ways you can use block paving to transform your outdoor space.


  1. Block Paving for Your Outdoor Patio or Terrace


What’s exciting about working on your patio or terrace in your garden is that you can get creative with it—as creative as you want to be.


Block paving provides you with an excellent and reliable base for items you want to include, whether it be a luxury garden set, your favourite potted plants, or even a hot tub. It also provides you with a safe and non-slip surface which is perfect for hosting BBQ and garden parties. With this, you no longer have to worry about your friends or neighbours slipping as they buzz around!


Aside from being a reliable foundation, garden paving can also highlight the beauty of the plants and trees in your garden. As long as you find the right colour combinations, you’ll see your garden come to life. You may also play with patterns to achieve a truly interesting and attractive yard!


Using block paving to create a cosy patio or terrace lets you achieve a low-maintenance yet fully functional and inviting outdoor space.


  1. Block Paving for Pathways


Block paving can also be applied to build pathways. This is an idea worth exploring if you want to create an intriguing walkway through your garden or an unobstructed route from the street to your front door.


On that note, remember that you must choose the brick to be used wisely. You’ll want a material that is smooth yet extra grippy to prevent slips, trips and falls. To ensure the best results, don’t hesitate to talk to your builders and let them know what you need.




Paying more attention to your outdoor spaces goes beyond helping you achieve an aesthetically pleasing garden. It’s also an effective way to enhance your lifestyle. It lets you enjoy even the most mundane outdoor activities, appreciate the beauty of your greenery and, ultimately, feel truly at home.


Looking for paving specialists in Poole? Look no further than Absolute Armour & Sons! For more than 25 years, we have been providing paving and surfacing services following meticulous standards. Allow us to transform your outdoor space—get in touch today!